Electronic pressure switch SC400 / SC410 / SC420 with measurement display and scalable analog output (4 ... 20 mA / 0 ... 10 V), up to 700 bar
Adjustement range:-1 ... 700 bar
The pressure switches SC400 / SC410 / SC420 with display provide continuous pressure monitoring and configuration of the set points without pressurising. It is easy to configure the switching point and reset point without pressurising or to change the type of contact (NO / NC), damping, delay and n - / p - switching. In addition, authorised personnel can quickly and easily access the user menu to alter the switching points. The analogue signal of S2410 and S2420 can be scaled from 20 % ... 100 % of the range. Switching currents from a few μA up to 500 mA can be switched by the output transistors.
By use of long - term tested ceramic or thin film sensors, this pressure switch features a high repeatability and durability, even in the case of a large number of pressure cycles. The turnable display and the turnable process connection (optional) allows the usage of this pressure switch even under difficult installation conditions.
The high - quality stainless steel housing qualifies the SC400 / SC410 / SC420 also for the usage under adverse conditions. For the higher pressure ranges all wetted parts are made of stainless steel, therefore working with almost every media. The tecsis SC400 / SC410 / SC420 are multifunctional applicable for measurement tasks within hydraulic and pneumatic applications.
Please Leave Your Product Enquiry Here. We will Get Back To You Soon.